The following are some select papers on CFD solutions using AcuSolve in different industrial applications.

Offshore Oil Platforms

CFD Truss Spar Hull Benchmarking Study O.H. Oakley and Y. Constantinides

CFD High L/D Riser Modeling Study Y. Constantinides, O.H. Oakley, and S. Holmes

Simulation of Riser VIV Using Fully Three Dimensional CFD Simulations S. Holmes, O.H. Oakley, and Y. Constantinides

Numerical Prediction of Bare and Straked Cylinder VIV Y. Constantinides, and O.H. Oakley

CFD Simulation of Truss Spar Vortex-Induced Motion S. Atluri, J. Halkyard, and S. Sirnivas

Truss Spar Vortex Induced Motions: Benchmarking of CFD and Model Tests S. Atluri, J. Halkyard, and S. Sirnivas

Analysis of Turbulent Flows and VIV of Truss Spar Risers Y. Constantinides, O.H. Oakley, and S. Holmes

Benchmarking of Truss Spar Vortex Induced Motions Derived from CFD with Experiments J. Halkyard, S. Sirnivas, S. Holmes, Y. Constantinides, O.H. Oakley Jr., and K. Thiagarajan

CFD Analysis of Vortex-Induced Motions of bare and Straked Cylinders in Currents K.P. Thiagarajan1, Y. Constantinides, and L. Finn,

Modeling Vortex Induced Motions for Sparse in Uniform and Stratified Flows O.H. Oakley Jr., Y. Constantinides, C. Navarro, and S. Holmes

Computational Aero Acoustics

CFD Simulation of Flow Tones from Grazing Flow past a Deep Cavity T. Bagwell

Validation of CAA Formulation Based on LightHill's Analogy for a Cooling Fan and Mower Blade Noise R. Sandboge, K. Washburn, C. Peak

Presentation of a CAA Formulation Based on LightHill's Analogy for Fan Noise S. Caro, R. Sandboge, J. Iyer, Y. Nishio

Validation of a CAA Formulation Based on Lighthill's Analogy Using AcuSolve and Actran/LA on an Idealized Automotive HVAC Blower and on an Axial Fan R. Sandboge, S. Caro, P. Ploumhans, R. Ambs, B. Schillemeit, K.B. Washburn, and F. Shakib

CFD Analysis for a Centrifugal Benchmark Blower with Flat Hub I: Flow Structures and Noise Source Generation R. Sandboge

A New CAA Formulation based on Lighthill's Analogy applied to an Idealized Automotive HVAC Blower using AcuSolve and Actran/LA S. Caro, P. Ploumhans, X. Gallez, R. Sandboge, F. Shakib, and M. Matthes

Turbulence Modeling

Assessment of DES Models for Separated Flow from a Hump in a Turbulent Boundary Layer Daniel C. Lyons, Leonard J. Peltier, Frank J. Zajaczkowski and Eric. G. Paterson

Chemical Mixing

Process Intensifier: Optimization Using CFD (Part 1) P. Csiszar, K. Johnson, and T. Post

Undestand Flow Patterns in Glass-Lined Reactors D.S. Dickey, K.J. Bittorf, C.R. Ramsey, and K. Johnson

Dynamics of Laminar Mixing in Continuous Stirred Tank Reactors P.C. Arratia, J. Kukura, and F.J. Muzzio

Mechanisms of Mixing and Creation of Structure in Laminar Stirred Tanks M.M. Alvarez, J.M. Zalc, T. Shinbrot, P.E. Arratia, and F.J. Muzzio

Using CFD To Understand Chaotic Mixing in Laminar Stirred Tanks J.M. Zalc, E.S. Szalai, M.M. Alvarez, and F.J. Muzzio

Extensive Validation of Computed Laminar Flow in a Stirred Tank with Three Rushton Turbines J.M. Zalc, M.M. Alvarez, F.J. Muzzio, and B.E. Arik

Practical chaotic mixing M.M. Alvarez-Hernandez, T. Shinbrot, J. Zalc, and F.J. Muzzio

Characterization of Flow and Mixing in an SMX Static Mixer J.M. Zalc, E.S. Szalai, F.J. Muzzio, and S. Jaffer

Validating the Galerkin Least-Square Finite Element Methods in Predicting Mixing Flows in Stirred Tank Reactors K. Johnson and K.J. Bittorf

Validation of the ORCA CFD Software For Three Stirred Tank Configurations: Rushton Turbine Impellers, Pitched Bladed Impeller, and the Ekato Interming Impeller E.S. Szalai, F.J. Muzzio, and K.J. Bittorf

Validation of the ORCA CFD Software Using SMX and Kenics Static Mixer Elements E.S. Szalai, F.J. Muzzio, and K.J. Bittorf

Computer Aided Mixing Modeling Using the Galerkin Least-Squares Finite Element Technique K.J. Bittorf and K. Johnson

Attraction of Minute Particles to Invariant Regions of Volume Preserving Flows by Transients T. Shinbrot, M.M. Alvarez, J.M. Zalc, and F.J. Muzzio

Understanding Pharmaceutical Flows J. Kukura, P.C. Arratia, E.S. Szalai, K.J. Bittorf, and F.J. Muzzio

Train CFD Simulations

High-Speed Passenger and Intercity Train Aerodynamic Computer Modeling S. Holmes, E. Toma, and M. Schroeder

Measurement of the Aerodynamic Pressures Produced by Passing Trains R.A. MacNeill, S. Holmes, and H.S. Lee

Urban Modeling

Fine Scale Modeling of Urban Structures: Dependence on Grid and Model Features S.E. Haupt, R.P. Wilson, L.J. Peltier and R.F. Junz

Practical Application of the LES Method to Mixing in Large Indoor Spaces Features K.J. Knight, K.K. Debus, J.M. Berkoe and T.J. Dasey

High Fidelity Modeling of Urban Features L.J. Peltier, S.E. Haupt and J.C. Wyngaard

Simulation Based Design

Toward Simulation-Based Design M.S. Shephard, M.W. Beall, R.M. O'Bara, and B.E. Webster

Civil Engineering Applications

Computational Fluid Dynamics Model for Tacoma Narrows Bridge Upgrade Project K. Debus, J. Berkoe, B. Rosendall, and F. Shakib

CFD Analysis of Large Caisson Interaction with Current at Supercritical Reynolds Number K. Subrata, K. Debus, J. Berkoe, and B. Rosendall